See Also
Use the Display/Size tab of the
Size
Width
This field will change the characteristic display width of the selected object(s). Similarly to the size, the width represents the horizontal dimension or width of display objects. In objects with different orientation choices, the width is the least distinctive dimension of the object (e.g. in buses with right or left orientations, the width is the vertical dimension of the bus bar, but in buses with up or down orientations, the width is the horizontal dimension of the bus bar).
To toggle whether or not the selected object(s) are anchored , check or uncheck this option
To force the selected object(s) to stay in the same position, check this option.
Orientation
This group will modify the orientation setting of the selected object(s). The possible settings will change depending on the type of object selected. Some object types do not have an orientation.
Shape
Use this group to modify the shape of the selected display objects. Possible shape settings will change depending on the type of objects selected. If objects of different types are selected and these types do not have a common set of shapes possible, the shape option will be blank and the shape cannot be changed.
For Substation objects, the Use Substation Layout Settings specifies that the shape selected in the Substation Display Options will be used.
When generator objects are selected, the shape selection determines the shape of the rotor inside the generator. The selections include images that represent possible generator fuel types including: coal, hydro, natural gas, nuclear, oil, solar, and wind. The other images include a dog bone, sine wave, or no rotor image. If selecting a rotor shape that can be filled, Line Color 2 on the Line/Fill tab determines the fill color for the inside of the shape.
Number of Selected Objects
This field shows the number of objects that are currently selected on the oneline.